Materials
Maximum Single Piece: 450mm x 300mm
Most commonly we use Acrylic and Substrate* (the two layer plastic used for electrical and data outlet labelling, name badges & signage). The following table is a guide of materials which can also be used.
| MATERIAL | ENGRAVING |
MAXIMUM THICKNESS CUT |
| Acrylic / Perspex | Yes |
Up to 10mm |
| Anodized Aluminum | Yes |
No |
| Cloth / Felt | Yes |
Yes |
| Corian | Yes |
Up to 3mm |
| Cork | Yes |
Up to 6mm |
| Delrin | Yes |
Up to 3mm |
| Glass | Yes |
No |
| Leather | Yes |
Yes |
| Marble | Yes |
No |
| Matte Board / Paper / Card | Yes |
Yes |
| MDF / Craftwood | Yes |
Up to 6mm |
| Melamine | Yes |
No |
| Mylar | Yes |
Up to 3mm |
| Stainless Steel | Marking |
No |
| Substrate (Traffolite / Trefolyte / Plastic)* | Yes |
All Available |
| Tile | Yes |
No |
| Timber / Wood | Yes |
No |
| Wood Veneer | Yes |
Up to 3mm (Light ply) |
Laser Max Samples
